Options

Soft starters for 3 phase induction motors

7.5 to 800kW (18 to 1600A)

200V, 400V, 575V, 690V

 

Digistart CS and IS Communications Options

Name	Description
Modbus Interface	Modbus RTU Interface
Ethernet Interface	Ethernet Interface (available early 2010)
PROFIBUS Interface	PROFIBUS DP Interface
DeviceNet Interface	DeviceNet Interface
USB Interface	USB Interface

 Digistart CS Options

Name	Description
Digistart CS - Remote Keypad	IP54 rated, panel mountable keypad and display for soft starter operation and monitoring.
Digistart CS - Pump Apps Module	Provides 3 digital inputs that can be configured to detect low pressure,high pressure and low water levels. A PT100 input is available for monitoring pump temperature. If any unwanted system conditions occur, the soft starter will trip thus preventing damage.
Digistart CS - Finger Guard Kit	This option also reduces the need for other external equipment, simplifying system design and requirements. Finger guards are available to provide IP20 protection for models CS3x140 to CS3x200.

Digistart IS Options

Name	Description
Digistart IS - Keypad mount kit	This allows the keypad to be remote mounted up to 3m from the soft starter. When panel mounted the keypad is IP65 rated.
Digistart IS - Fingerguard	Finger guards are available to provide IP20 protection for models IS2x0145B to IS2x0220B
Digistart IS - I/O Expansion	Provides additional 2 x digital inputs, 3 x relay outputs, 1 x analog input and 1 x analog output.
Digistart IS - RTD & GND Fault Card	The RTD (resistive temperature device) and GND (ground fault protection) card provides additional 6 x PT100 RTD inputs and 1 x ground fault input.
Digistart IS - Volt Measure Card	Allows real-time monitoring of mains voltage, eliminating the need for external devices. The volt measure card also enables under-voltage and over-voltage protection.